Operation; Controls - Exmark Lazer LZE Operator's Manual

Operation

Note: Determine the left and right sides of the
machine from the normal operating position.

Controls

Become familiar with all the controls before starting
the engine and operating the machine.
Motion Control Levers
The motion control levers located on each side of
the console control the forward and reverse motion
of the machine.
Moving the levers forward or backward turns
the wheel on the same side forward or reverse
respectively. Wheel speed is proportional to the
amount the lever is moved.
Moving the levers outward from the center position
into the T-slot locks them in the neutral position
(Figure 5).
Note: When the motion control levers are in the
neutral position, a LCD indicator displays on the
message display.
1. Neutral lock position
(handles out)
2. Neutral operate position
(handles in)
3. Front of Unit
Choke Control (Non-EFI or RED
Equipped Models)
Located on right console (black lever) (see Figure 6).
The choke is used to aid in starting a cold engine.
Moving the choke lever forward will put the choke in
the "ON" position and moving the choke lever to the
rear, to the detent, will put the choke in the "OFF"
position. Do Not run a warm engine with choke in
the "ON" position.
27
Operation
Figure 5
4. Forward
5. Neutral (operate)
6. Reverse
g008593