Check Safety Interlock System - Exmark LAZER Z Series Operator's Manual

Maintenance

Check Safety Interlock System

Service Interval: Before each use or daily
Important: It is essential that operator safety mechanisms be connected and in proper operating
condition prior to use.
Note: If machine does not pass any of these tests, Do Not operate. Contact an Authorized Service Dealer.
Note: To prevent engine cut-outs on rough terrain, the seat has a 1/2 second time delay before the engine
begins to shutdown.
Check the Normal Engine Starting Chart
Parking Brake
State of System
*Note: The starter will crank with the PTO switch in the "ON" (pulled up) position; however, the system will
disengage the PTO and a reset PTO error will occur. Engaging the PTO will require the operator to reset the
PTO switch by turning it "OFF" (pushed down) and then turning it "ON".
PTO
Engaged Disengaged
(Blades)
Up position,
Engaged
but blades
disengaged*
System
Motion Control
Levers
In seat or out
Both levers out
(neutral lock)
In seat or out
Both levers out
(neutral lock)
44
Operator Outcome
Starter should
of the seat
crank
Starter should
of seat
crank