Exmark LAZER Z Series Operator's Manual page 22

Specifications
P/N 135-2252: 10 microns
• Speeds:
– 3TNV80FT:
◊ 0-11.0 mph (17.7 km/hr) forward.
◊ 0-6.0 mph (9.7 km/hr) reverse
– 3TNV88C:
◊ 0-12.5 mph (20.1 km/hr) forward.
◊ 0-7.0 mph (11.3 km/hr) reverse
• Drive wheel release valves allow machine to be
moved when engine is not running.
Deck Gear Box
Oil Type: SAE 80W-90 (API GL-5) gear lube
Tires & Wheels
Drive — All Models
Type
Quantity
Tread Size
Size
Ply Rating
Pressure
Front Caster— All Models
Type
Quantity
Tread Size
Size
Cutting Deck
• Cutting Width:
– 60 inch (152.4 cm)
– 72 inch (182.9 cm)
– 96 inch (243.8 cm)
• Discharge: Side or Rear
• Blade Size:
– 60 inch Deck: 20.5 inches (52.1 cm) (3 ea.)
– 72 inch Deck: 24.5 inches (62.2 cm) (3 ea.)
Pneumatic (Air-Filled)
2
"Multi-Trac C/S"
26 x 12.00-12
6
18 psi (124 kPa)
Semi-Pneumatic
2
Smooth
15 x 6.00-6
– 96 inch Deck: 24.5 inches (62.2 cm) (4 ea.)
• Blade Spindles: Solid steel spindles with 1.0 inch
(25 mm) I.D. bearings.
• Deck Drive:
– Wet clutch from transmission to gearbox on
deck using driveshaft.
– Blades Driven By:
◊ Side Discharge: One "B" Section belt
(w/self-tensioning idler) from gearbox
shaft on deck to blade spindles.
◊ 72 Inch Rear Discharge: One "BB"
Section belt (w/self-tensioning idler) from
gearbox shaft on deck to blade spindles.
◊ 96 Inch Deck: One "B" Section or 5V belt
on center deck. One "A" Section belt on
each wing.
• Deck:
– Side Discharge: Full floating deck is attached
to out-front support frame. Six anti-scalp
rollers provide maximum turf protection.
Deck design allows for bagging, mulching or
side discharge.
– Rear Discharge: Full floating deck is attached
to out-front support frame. Deck design
allows for rear discharge or finish cut (reduced
discharge). Side bumpers provide maximum
turf protection.
◊ 72 Inch: 4 anti-scalp rollers
◊ 96 Inch: 13 anti-scalp rollers
• Deck Depth:
All Decks: 5.5 inches (14.0 cm)
• Cutting Height Adjustment:
All Decks: from 1 inch (2.5 cm) to 5.5 inches (14
cm) in 1/4 inch (6.4 mm) increments.
Pressing the deck lift switch causes a hydraulic
cylinder to raise or lower the deck (and side wings
– if equipped).
• Mulching Kit: Optional.
22