Table of Contents
Advertisement
using the DVR
setting event recording properties
You can set each channel's resolution, quality and IPS for event recordings.
Using the mouse may help easy setup.
.
Use the up/down buttons (▲▼) in <record> window to
move to <rec Quality & resolution>, and press
[enter] button.
.
Select <event>.
Event recording setup window appears.
.
Use direction buttons (▲▼_ +) to move to a desired
item, and select it.
~
Resolution : Sets the resolution of the recorded screen.
`
For SHR-7080,7082,7160,7162 models, setting the resolution to
<Full D1(L)> limits the maximum supported channels to 4.
resolution
name
CIF(S)
Half D1(M)
Full D1(L)
Record Rate : Image Per Second, means the frames recorded per a second.
~
~
Record Quality : Sets the recording quality.
.
When the Event recording setup is done, press <oK>.
record option
You can set the recording to stop or overwrite when the HDD is full.
Using the mouse may help easy setup.
.
Use the up/down buttons (▲▼) in <record> window to
move to <record option>, and press [enter] button.
.
Use direction buttons (▲▼_ +) to move to a desired
item, and set the value.
0_ using the DVR
00769B_SHR-8162_ENG-NEW.indb 50
resolution
NTSC: 352 X 240, PAL: 352 X 288
NTSC: 704 X 240, PAL: 704 X 288
NTSC: 704 X 480, PAL: 704 X 576
REC Quality & Resolution
Event
Standard
CH
Resolution
Record Rate
Record Quality
1
Full D1(L)
30ips
2
Full D1(L)
30ips
3
Full D1(L)
30ips
4
Full D1(L)
30ips
5
Full D1(L)
30ips
6
Full D1(L)
30ips
7
Full D1(L)
30ips
8
Full D1(L)
30ips
Previous/Next Page
OK
Cancel
description
Samples each half of horizontal and
vertical screen.
Samples half of the horizontal screen.
Samples original screen size.
Record Option
Disk End Mode
Overwrite
Disk End Beep
Auto Delete
1
day
OK
Cancel
Level4
Level4
Level4
Level4
Level4
Level4
Level4
Level4
2008-12-04 오전 10:15:37
Advertisement
Table of Contents
