Mailing Service; Event Setting - Samsung SHR-8080 User Manual

using the DVR

mailing service

You can send an e-mail to a DVR-registered user at a specifi c time interval, or if an event occurs.
smtp setting
Sets the SMTP mail server.
Using the mouse may help easy setup.
.
In the <network> setting window, press the up/down
(▲▼) button to move to <mailing service> and press the
[enter] button.
. Select <smtp>.
You will see the SMTP setting window.
. Use direction buttons (▲▼_ +) to move to a desired item
and set the value.
Server Type : Displays the connected server type.
~
Server : Enter a server to connect to.
~
Port : Sets the communication port.
~
Use Authentication : Check this if the SMTP server uses user authentication.
~
The account input box will be activated.
~ User : Enter a user to use authentication when connecting to the SMTP server.
Password : Enter the password of the SMTP server user.
~
~ Secure Transfer : Select one from <never/tLs> and <if available/tLs/ssL>.
Sender : Use the virtual keyboard to enter the sender's e-mail address.
~
`
Refer to "Using Virtual Keyboard". (Page 36)
Test : Conducts the test on the server settings.
~
.
When the SMTP setting is done, press <oK>.

event setting

You can set the interval and type of the event that will be sent to the user.
Using the mouse may help easy setup.
.
In the <network> setting window, press the up/down
(▲▼) button to move to <mailing service> and press the
[enter] button.
. Select <event>.
. Use direction buttons (▲▼_ +) to move to a desired item
and set the value.
Event Interval : Set the event interval.
~
`
If a series of events occurs, the e-mail will be sent at the specifi ed
interval, not on each event.
~ Use Event Transfer : Select an event type to send if an event occurs.
If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.
. When the event setting is done, press <oK>.
0_ using the DVR
00769B_SHR-8162_ENG-NEW.indb 60
Mailing Service
SMTP
Event Group Recipient
 ServerType SMTP mail Server
 Server
 Port 11
Use Authentication
 User
 Password
********
 Secure Transfer Never/TLS
 Sender ex. user@example.net
TEST
OK Cancel
Mailing Service
Event
SMTP Group Recipient
 Event Interval 10 min
Use Event Transfer
Alarm Motion
Change P/W HDD Info Video Loss
Power On/Off Manual Record
OK Cancel
2008-12-04 오전 10:15:54