Samsung SHR-8080 User Manual page 16

installation
adding a hdd
M
`
Make sure to unplug the power cord from the wall outlet before proceeding with the installation.
`
Number of HDDs to install : SHR-7082/7162/8082/8162 : Default 1 HDD + Up to 4 HDDs added
`
By factory default, the master unit is equipped with one HDD.
The following instructions are when you have installed the maximum number of HDDs on the master unit.
1.
First, loosen the screws in the left and right sides
and remove the cover.
1) if adding hdds to shr-7080, 7160, 8080 & 8160
M
`
For SHR-7082/7162/8082/8162 models, see the following page.
. Loosen the screws (x4) in the left/right and upper
sides and remove the upper and lower brackets.
. Install HDDs (x3) on the lower bracket and fi x them
with screws.
`
The screw (UNC 6-32) to use in the installation comes with
the HDD.
`
Firmly secure the screw so that it can not get loose from
such as vibration.
.
Install HDDs (x2) on the upper bracket and fi x them
with screws.
1_ installation
00769B_SHR-8162_ENG-NEW.indb 16
SHR-7080/7160/8080/8160 : Default 1 HDD + Up to 5 HDDs added
Upper Bracket
Upper Bracket
Add
Add
Add
Add
Cover
Lower
Bracket
Add
Lower Bracket
Installed by
default
2008-12-04 오전 10:14:01