Record Option - Samsung SDE-4001 User Manual

using the DVR

Record Option

You can set the recording to stop or overwrite when the HDD is full.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Record> window to
move to <Record Option>, and press [ENTER] button.
2. Use direction buttons ( ◄ ►) to move to a desired
item, and set the value.
• Disk End Mode : If selected <Overwrite>, recording will
continue despite the HDD full while overwriting the oldest.
If selected <Stop>, the recording will stop when the HDD is
full.
• Disk End Beep : If selected <Stop>, the button is activated.
If you check it, the beep will sound on the disk full and the
recording stops.
• Auto Delete : If you check it, Record Period setup is activated.
If you specify the auto deletion period, the recording data before the period will be deleted automatically.
(This option will be enabled only if Disk End Mode is set to "Overwrite".)
3. When the recording option setup is done, press <OK>.
50_ using the DVR
Record Option
 Disk End Mode
Overwrite
Disk End Beep
Auto Delete

Auto Delete 180 day
The recording information will be deleted.
Do you want to proceed?
OK Cancel
OK Cancel