Event Monitoring - Samsung SHR-8080 User Manual

CH1
CH9
CH1
H11 CH12 CH13
CH1
1 CH12 CH13

event monitoring

This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs.
In "monitor>event display", set the event monitoring to ON/OFF and specify the event display time.
CH2 CH3
(Page 46)
CH1
2 CH3
~
CH5 CH6
CH1
5 CH6
CH8 CH9 CH3
~
8 CH9 CH3
CH9 CH10
CH11 CH12
Event occurrence
CH3
CH9 CH10
9 CH10
CH11 CH12
Event occurrence
11 CH12
CH3
3
M
00769B_SHR-8162_ENG-NEW.indb 33
CH2
CH1
CH2
CH1
CH2
If multiple events occur simultaneously, the screen will switch to a split mode.
CH2
- 2~4 events: 4-split mode
- 5~9 events: 9-split mode
CH4
- 10~16 events: 16-split mode
If the second event occurs within the set time of <event display>, the first event will last until the second
CH4
CH13 CH14
one is terminated. (Page 46)
`
Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.
CH15 CH16
CH1
CH13 CH14
`
Ex : If you set <Event Display> to 5 seconds, and the second event occurs in CH 2 within the set time after the first event
CH13 occurred in CH 1. CH14
CH15 CH16
CH15 CH16
CH1
CH1
`
Press the [ALARM] button to reset the alarm settings and to release the event mode.
`
If an alarm activates in the condition you have set the event record, and pre/post alarm times, the event record will
be performed.
`
This will also apply to the SPOT OUT monitor.
5 seconds
Stop alarm
CH1 CH2
4 seconds
CH1 CH2
CH1 CH2
9 seconds
Stop alarm
English _
2008-12-04 오전 10:14:59