Connecting Pos Device; Connecting The Alarm Input/Output - Samsung SHR-8080 User Manual

connecting pos device

1. You can connect a POS device to the RS-232C port on the product's rear side when you connect it directly with
a RS-232C cable.
.
Connection setup for the RS-232C port is available in "menu > device > pos devices", press the
<pos device setup> button and set <Baud rate, parity, data, stop bit and transfer type>. (Page 45)

connecting the aLarm input/output

The Alarm In/Out port at the back is composed of the following.
1. Alarm In/Out Port on 7080/7082/8080/8082
. Alarm In/Out Port on 7160/7162/8160/8162
ALARM IN 1 ~ 8 (SHR-7080/7082/8080/8082) : Alarm Input Port
~
~ ALARM IN 1 ~ 16 (SHR-7160/7162/8160/8162) : Alarm Input Port
ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and resumes
~
sensing.
~ ALARM OUT 1 ~ 4 : Alarm Output Port
00769B_SHR-8162_ENG-NEW.indb 21
ALARM OUT ALARM IN ALARM IN
English _1
2008-12-04 오전 10:14:29