Programming Options - DSC GS2060-SM Installation Manual

Alarm communicator, gprs cellular communicator, ethernet/internet communicator, ethernet/internet and gprs dual-path communicator
Table of Contents

Advertisement

[008] DNS Server IP 2
Programming this Section is not permitted on a UL/ULC listed system.
Default (000.000.000.000)
Enter the IP address for DNS Server 2. Format is 4 fields, each field is a 3 digit decimal. Valid range: 000-255.
NOTE: If no value is programmed and DHCP is used, the DHCP Server will assign this value. If an
address is programmed and DHCP is used, the address that you program will be used instead of the
DHCP address.

Programming Options

[011] Installer Code
Default (CAFE)
Program your installer code for this Communicator module. The installer code will be required when programming
the Communicator module. Valid range: 0000 - FFFF.
[012] DLS Incoming Port
Default (0BF6/3062)
The DLS Incoming Local Port (listening port) is the port DLS IV will use when connecting to the Communicator. If a
router or gateway is used, it must be programmed with a Transmission Control Protocol (TCP) port forward for this
port to the Communicator module IP address. Valid range: 0000-FFFF.
[013] DLS Outgoing Port
Default (0BFA/3066)
The DLS Outgoing Port is used for outgoing session to DLS IV after an SMS request has been sent to the Commu-
nicator. Use this Section to set the value of the local outgoing port. The value must be changed if the Communicator
is located behind a firewall and must be assigned a particular port number, as determined by your network adminis-
trator. In most cases, changing the default value or configuring your firewall with this port is not required.
Valid range: 0000-FFFF.
NOTE: If Section [006] Toggle Option [7] is ON. DLS will use the Primary path for session. If Section
[006] Toggle Option [7] is OFF DLS will use the Ethernet path, if available.
[020] Time Zone
Default (00)
Use Offset Hours column to find your local time zone offset from GMT/UTC. Record the two digit HEX value
from the HEX column on same row. Program this HEX value as your Time Zone. Valid range is 00 - FF.
Offset
Std
HEX
Hours
Abbrev
01
-12
BIT
Baker Island Time
NUT
Niue Time
05
-11
SST
Somoa Standard Time
HAST Hawaii-Aleutian Standard Time
THAT Tahiti Time
09
-10
TKT
Tokelau Time
CKT
Cook Island Time
0B
-9.5
MIT
Marquesas Island Time
AKST Alaska Standard Time
0D
-9
GIT
Gambier Island Time
PST
Pacific Standard Time
11
-8
PST
Pitcarirn Standard Time
CIST Clipperton Island Standard Time
15
-7
MST Mountain Standard Time
CST
Central Standard Time
GALT Galapagos Time
19
-6
PIT
Peter Island Time
EAST Easter Island Standard Time
Location
HEX
16
Offset
Std
Hours
Abbrev
47
+5.5
IST
Indian Standard Time
48
+5.75
NPT
Nepal Time
XJT
Xinjiang Standard Time
EKST East Kazakhstan Standard Time
LKT
Sri Lanka Time
VOST Vostok Time
49
+6
OMSK Omsk Standard Time
NOVT Novosibirsk Time
BTT
Bhutan Time
BIOT British Indian Ocean Time
CCT
Cococ Islands Time
4B
+6.5
MMT Myanmar Time
CXT
Christmas Island Time
KOVT Khovd Time
KRAT Krasnoyarsk Time
4D
+7
WIB
Waktu Indonesia Bagian Barat
ICT
Indochina Time
BDT
Bangladesh Standard Time
Table 7: Time Zone Offset
Location

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tl260-smTl260gs-sm

Table of Contents