Receiver Diagnostic Testing; System Information (Read Only) - DSC GS2060-SM Installation Manual

Alarm communicator, gprs cellular communicator, ethernet/internet communicator, ethernet/internet and gprs dual-path communicator
Table of Contents

Advertisement

[683] Notification Zone 9 - 16 Toggle Options
The default for each Notification Zone Toggle is OFF.
TOGGLE
ZONE
[684] Notification Zone 17 - 24 Toggle Options
The default for each Notification Zone Toggle is OFF.
TOGGLE
ZONE
[685] Notification Zone 25 - 32 Toggle Options
The default for each Notification Zone Toggle is OFF.
TOGGLE
ZONE
[686] Notification Zone 33 - 40 Toggle Options
The default for each Notification Zone Toggle is OFF.
TOGGLE
ZONE
[687] Notification Zone 41 - 48 Toggle Options
The default for each Notification Zone Toggle is OFF.
TOGGLE
ZONE
[688] Notification Zone 49 - 56 Toggle Options
The default for each Notification Zone Toggle is OFF.
TOGGLE
ZONE
[689] Notification Zone 57 - 64 Toggle Options
The default for each Notification Zone Toggle is OFF.
TOGGLE
ZONE

Receiver Diagnostic Testing

[901] Diagnostic Test Transmission
[1]
Ethernet 1
[2]
Ethernet 2
[3]
GPRS 1
[4]
GPRS 2
[5],[6],[7],[8]
Reserved
This Section may be used by the installer to force the Communicator to send an immediate test transmission to
specific receivers, to verify that the communications paths are available. Diagnostic Test Transmission failure
will indicate as FTC trouble (Yellow LED = 9 flashes). If an FTC error occurs when testing all receivers, select
only one receiver and repeat test to isolate the receiver that is not communicating.

System Information (Read Only)

NOTE: Sections [988] - [998] are provided for information (Read Only). Values can not be modified in
these Sections.
[987] Language Version
This Section will display the current Language version of the Communicator.
[988] DNS 1 IP Address
This Section will display the IP address of DNS Server 1. This is useful when the unit is configured for DHCP and
you need to see the IP address was assigned to the device by the DHCP Server. This value is programmed in Sec-
tion [007] or assigned by DHCP.
[989] DNS 2 IP Address
This Section will display the IP address of DNS Server 2. This is useful when the unit is configured for DHCP and
you need to see the IP address that was assigned to the device by the DHCP Server. This value is programmed in
Section [008] or assigned by DHCP.
[990] Boot Loader Version
This Section will display the current Boot Loader version of the Communicator.
01
02
03
9
10
11
01
02
03
17
18
19
01
02
03
25
26
27
01
02
03
33
34
35
01
02
03
41
42
43
01
02
03
49
50
51
01
02
03
57
58
59
(OFF).
(OFF).
(OFF).
(OFF).
(OFF).
Table 22: Notification Zone 9 - 16 Toggle
04
05
06
12
13
14
Table 23: Notification Zone 17 - 24 Toggle
04
05
06
20
21
22
Table 24: Notification Zone 25 - 32 Toggle
04
05
06
28
29
30
Table 25: Notification Zone 33 - 40 Toggle
04
05
06
36
37
38
Table 26: Notification Zone 41 - 48 Toggle
04
05
06
44
45
46
Table 27: Notification Zone 49 - 56 Toggle
04
05
06
52
53
54
Table 28: Notification Zone 57 - 64 Toggle
04
05
06
60
61
62
25
07
08
15
16
07
08
23
24
07
08
31
32
07
08
39
40
07
08
47
48
07
08
55
56
07
08
63
64

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tl260-smTl260gs-sm

Table of Contents