List Of Errors - JUKI MS-1261A-DWS Instruction Manual

4-7. List of errors

Error code Description of error
E000 Execution of data initial-
ization (This is not an
error.)
E007 Motor overload
E011 Media is not inserted
E012 Read error
E013 Write error
E014 Write protect
E015 Format error
E016 External media over-ca-
pacity
E019 File size over
E022 File undetected
E031 Air pressure drop
E032 File compatibility error
E071 Motor output connector
disconnection
E079 Overload operation error
E081 Cloth puller motor devia-
tion error
E204 USB thumb drive insertion • This error message is displayed
Cause
• In the case the control box is
changed.
• In the case the initialization
operation is executed.
• In the case the machine head is
locked.
• In the case of sewing ex-
tra-heavy weight material that
exceeds the guaranteed mate-
rial thickness.
• In the case the motor fails to
rotate.
• In the case of the motor or driver
failure.
• In the case no media is inserted. • Turn the power OFF and check for a media.
• In the case data stored on the
media cannot be read.
• In the case data cannot be writ-
ten on the media.
• In the case the media is placed
in the write-prohibition state.
• In the case formatting of the
media cannot be carried out.
• In the case the capacity of media
is not enough.
• In the case of attempting to read
the file that exceeds the maxi-
mum possible size from the USB
thumb drive to the operation
panel.
• In the case of attempting to read
the file that is not stored in the
USB thumb drive to the opera-
tion panel.
• In the case the air pressure has
dropped.
• In the case the file is not com-
patible.
• The motor connector has slipped
off.
• An excessive load is applied to
the main shaft motor.
• Load applied to the cloth puller
motor is too large for the motor
to operate.
in the case the sewing machine
is started while a USB thumb
drive remains in the sewing
machine.
– 65 –
Item to be checked
Not a failure
• Check whether the pulley is entangled with
thread.
• Check whether the motor output connector
has loosened.
• Check whether the motor can be turned
smoothly by hand.
• Turn the power OFF and check for a media.
• Turn the power OFF and check for a media.
• Turn the power OFF and check for a media.
• Turn the power OFF and check for a media.
• Turn the power OFF and check for a media.
• Turn the power OFF and check the USB
thumb drive.
• Turn the power OFF and check for a media.
• Check for looseness and slip-off of the motor
output connector.
• Check whether the cloth puller motor runs
smoothly.
• Remove the USB thumb drive.