Oiling And Draining Of Oil - JUKI MS-1261A-DWS Instruction Manual

2-3. Oiling and draining of oil

Before putting your sewing machine into use, fill the oil tank with the oil supplied with the sewing machine.
❶
2) Draining the oil and changing the oil
Firstly, loosen wood screws ❶ (three pieces). Detach oil tank cover ❷ . Then, loosen screw ❸ . Discharge
the oil remaining in the oil tank completely. After discharging the oil, be sure to tighten screw ❸ .
In order to increase durability of the sewing machine, it is recommended to change the oil with new oil af-
ter the first four weeks have passed since the first use of the sewing machine, then carry out an oil change
at an appropriate interval.
The waste oil must be disposed of properly according to the relevant laws and regulations in
your area.
❶
❷
A
H
L
B
❶
– 4 –
1) Feeding oil
Detach oil sight window ❶ .
Put JUKI New Defrix Oil
No. 1 or JUKI CORPORA-
TION GENUINE OIL 7 into
the oil tank through the oil
hole.
Fill the oil tank with the aforementioned oil until
the oil surface reaches between two indicator
lines (upper marker line A and lower marker line
B). After filling the oil tank, be sure to fit oil sight
window ❶ back to its home position.
❸