Table of Contents
Advertisement
4-4-8. List of sewing data
(1) Sewing data to be used for free sewing patterns and step sewing patterns
No.
Item name
S001
Shape
S003
Stitch length
S004
Limit of sewing speed
*1
S005
Presser foot pressure
*2
S006
Cloth pulling amount
S007
Cloth puller pressure
*3
S011
Multi-layered section
changeover ON sensor
value
S012
Multi-layered section
sewing speed
*1
S013
Number of stitches when
the presser foot runs on
the multi-layered section
S015
Cloth pulling amount
when the presser foot
runs on the multi-layered
section
S016
Cloth puller pressure
when the presser foot
*3
runs on the multi-layered
section
*1: The actual sewing speed is limited by "S003 Stitch length" and the set value of cloth pulling amount.
In the case the set value of stitch length is 3.1 mm or more: Maximum sewing speed 5000 sti/min
In the case the set value of cloth pulling amount is 4.6 mm or more: Maximum sewing speed 4000 sti/min
*2: If this value is set to a negative value (minus value), the presser foot will go up. If the presser foot height is set so
that it floats, the multi-layered section changeover function will be disabled.
*3: If this value is set to a negative value (minus value), the cloth puller will go up.
Input range
Free sewing
Step
sewing
Enter the stitch length according to the feed amount of
1.4 to 4.2mm
sewing machine. (The feed amount of the sewing ma-
chine will not change if this value is changed.)
‐
150 to
5500sti/min
–350 to 200
‐
‐
1.2 to
5.5mm
–90 to 120
‐
500 to 3000
-
If the multi-layered section sensor value exceeds this
value, the multi-layered section is detected.
／
Multi-layered
section is not
detected
This data item is used for setting the sewing speed to be
150 to
-
applied from the time at which the multi-layered section
5500sti/min
is detected to the time at which the multi-layered section
sewing ends.
This data item is used for setting the number of stitches
0 to 200
-
to be sewn from the time at which the multi-layered sec-
stitches
tion of material is detected to the time at which the entire
presser foot runs on the multi-layered section.
While the sewing machine is engaged in the sewing of
this number of stitches, the sewing machine operates
using the cloth pulling amount set with "S015" and the
cloth puller pressure set with "S016".
1.2 to
-
5.5mm
–90 to 160
-
– 39 –
Advertisement
Table of Contents
