How To Change The Part Number, Process Or Comment For The Sewing Pattern Data - JUKI MS-1261A-DWS Instruction Manual

4-4-3. How to change the part number, process or comment for the sewing pattern data

Part number, process or comment can be entered to allow the operator to easily understand the application
of sewing pattern.
The method to enter a part number is described below. Same method applies when entering a process or
comment.
❷
< Part number setting screen >
Whether the part number / process or the comment is displayed can be changed with the
memory switch U404. Refer to
❽
❼ ❺ ❻
"4-5-1. Memory switch data" p. 45
– 26 –
① Calling the part number setting screen
The part number setting screen is displayed by
❼ after selecting "S061 Part num-
pressing
ber" on the sewing data edit screen.
② Entering the part number
The place (what character number) at which a
part number is entered can be selected by press-
❺ . Characters (representing the part
ing
number) can be entered at that place by pressing
❻ .
One of the entered characters that is selected can
be deleted by
can be deleted by keeping reset key held pressed
for one second.
❽ is pressed, the current screen
When
returns to the sewing data edit screen.
Characters that can be entered
A - Z, 0 - 9, ., +, -, /, #, (line feed), (blank)
for details.
❷ . All entered characters