To Use The Sewing Machine With A Cloth Puller For Sewing Heavy-To Medium-Weight Materials; Replacing The Feed Dog; Changing The Throat Plate - JUKI MS-1261A-DWS Instruction Manual

3-12. To use the sewing machine with a cloth puller for sewing heavy-to medium-weight ma-
terials
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
The MS-1261A has been developed to sew extra heavy-weight materials as standard. Various kinds of gaug-
es have been prepared to enable the machine to be used for sewing heavy- to medium-weight materials. Re-
place the gauge, when sewing heavy- to mediumweight materials, following the procedure described below.

3-12-1. Replacing the feed dog

❶

3-12-2. Changing the throat plate

❶
❷
❶
❷
Remove the throat plate. Loosen screw ❶ in the
feed dog and remove the feed dog. Then, replace
the feed dog with an appropriate one.
Each of the feed dogs for heavy- to
medium-weight materials has been
designed so that it can be used only
by replacing it without adjusting the
feed dog height. However, it is really
necessary to adjust the feed dog height,
refer to
height" p. 10
★ To change the height in difference on the
righthand side of the feed dog
Loosen two serews ❶ in the adjusting feed dog and
remove spacer ❷ (plate thickness: 0.5 mm).
Many different types of spacers are available.
Detach throat plate setscrews ❶ (two pieces) and
❷ (one piece). Then, change the throat plate with an
appropriate one.
– 14 –
"3-7. Adjusting the feed dog