Nfc - JUKI MS-1261A-DWS Instruction Manual

4-8-2. NFC

The operation panel supports NFC (Near Field Communication).
Sewing data, maintenance information or the like can be viewed, edited, copied, etc., on an Android terminal
(such as tablet and smartphone) on which JUKI application for Android [JUKI Smart App] has been installed,
by means of the NFC communication function.
Refer to the Instruction Manual for JUKI Smart App for details of JUKI application for Android [JUKI Smart
App].
① Position of the NFC antenna
① Position of the NFC antenna
<Fig.1>
<Fig.2>
② Precautions to be taken when handling NFC
• The position of the NFC antenna varies according to the tablet/smartphone used.
Be sure to read the instruction manual of your device before using the NFC communication function.
• To use the NFC communication function, place the NFC communication function setting in "Enable"
while referring to the instruction manual for your tablet/smartphone.
1
❶
– 70 –
In the case of carrying out the NFC communica-
tion between the sewing machine and a tablet
or smartphone, bring the antenna of the tablet or
smartphone near to NFC mark ❶ as shown in
Fig. 2.
* If the NFC communication has failed, error mes-
sage will be displayed on the tablet/smartphone
screen.
When the error message is displayed on the
screen, carry out the NFC communication again.