Table of Contents
Advertisement
3-10-2. Adjusting the inclination of the cloth puller belt
❷
1) Loosen hexagon head setscrews ❷ (two pieces).
Rotate the cloth puller so that it is in parallel with
the feed dog.
3-11. LED hand light
WARNING :
When adjusting the sensor, neither put your hand close to the needle entry area nor put your foot on
the pedal in order to protect against injuries.
❶
If the cloth puller inclines (as shown
with θ), the chain-off thread skipping
may occur.
* This LED is intended to improve operability
of the sewing machine and is not intended for
maintenance.
The sewing machine is provided as standard with an
LED light which illuminates the needle entry area.
Intensity adjustment and turn-off of the light is carried
out by pressing switch ❶ . Every time the switch is
pressed, the light is adjusted in intensity in five steps
and is turned off in turn.
[Change of intensity]
⇒ ...... 4
1
Bright ⇒ ...... Dim ⇒ Off ⇒ Bright
In this way, every time the switch ❶ is pressed, the
hand lamp status is changed in repetition.
– 13 –
⇒ 5 ⇒
1
Advertisement
Table of Contents
