Programming A Rolling Code System - Lexus LX 470 Owner's Manual

The battery side of the hand−held transmitter must be pointed
R
away from the HomeLink during the programming process.
For Canadian users, follow the procedure in "Programming an
entrance gate/Programming all devices in the Canadian
market".
R
1. Decide which of 3 HomeLink buttons you want to program.
2. Place your hand−held garage transmitter 25 to 75 mm (1 to
3 in.) away from the surface of the HomeLink
Keep the indicator light on the HomeLink
programming.
3. Simultaneously press and hold the hand−held garage
transmitter button along with the selected HomeLink
4. When the indicator light on the HomeLink
slow to a rapid flash after 20 seconds, you can release both
buttons.
5. Test the operation of the HomeLink
programmed button. If programming a garage door opener,
check to see if the garage door opens and closes.
If the garage door does not operate, identify if your garage
transmitter is of the "Rolling Code" type. Press and hold the
programmed HomeLink
rolling code feature if the indicator light (on the HomeLink
flashes rapidly and then remains lit after 2 seconds. If your
garage transmitter is the "Rolling Code" type, proceed to the
heading "Programming a rolling code system".
6. Repeat steps 2 through 5 for each remaining HomeLink
R
. button to program another device.
R
in view while

Programming a rolling code system

If your device is "Rolling Code" equipped, it is necessary
R to follow steps 1 through 4 under the heading
button.
"Programming the HomeLink
R
changes from a
the steps listed below.
1. Locate the "training" button on the ceiling mounted garage
door opener motor. The exact location and color of the button
R
by pressing the newly
may vary by brand of garage door opener. Refer to the owner's
guide supplied by the garage door opener manufacturer for the
location of this "training" button.
2. Press the "training" button on the ceiling mounted garage
door opener motor.
Following this step, you have 30 seconds in which to initiate
step 3 below.
INTERIOR EQUIPMENT
R
button. The garage door has the
R
)
R
R
" before proceeding with
63