Table of Contents
Advertisement
If you leave the key in the "ACC" or "LOCK" position and open
the driver's door, a buzzer will remind you to remove the key.
31X003a
"LOCK" − Engine is off and the steering wheel is locked.
The ignition key can be removed only at this position.
To turn the key from "ACC" to the "LOCK" position, you must
put the transmission selector lever in the "P" position.
Once you remove the key, the engine immobiliser system is
automatically set. See "Engine immobiliser system" on page
11.
When starting the engine, the key may seem stuck at the
"LOCK" position. To free it, first be sure the key is pushed all
the way in, and then rock the steering wheel slightly while
turning the key gently.
If, in an emergency, you must turn the engine off while the
vehicle is moving, turn the key only to "ACC".
STARTING AND DRIVING
PARKING BRAKE
31X065
1
To set: Pull up the lever. For better holding power,
first depress the brake pedal and hold it while setting
the parking brake.
2
To release: Pull up the lever slightly (1), press the
lock release button (2), and lower the lever (3).
Before leaving your vehicle, firmly apply the parking brake. For
better holding power, first depress the brake pedal and hold it
while setting the parking brake.
CAUTION
Before driving, make sure the parking brake is fully
released and that the parking brake reminder light is off.
201
Advertisement
Table of Contents
