Table of Contents
Advertisement
(c) Using engine braking
31X009e
To use the braking power of the engine, downshift the
transmission in the way described below:
1
Push the overdrive switch. The "O/D OFF" indicator light
will come on and the transmission will downshift to third
gear.
When the cruise control is being used, even if you
downshift the transmission by pushing and releasing the
overdrive switch, engine braking will not be enabled
because the cruise control is not cancelled. For ways to
decrease the vehicle speed, see "Cruise control" on page
213.
2
Shift into the "2" position. The transmission will downshift
to second gear when the vehicle speed is or becomes
lower than the speed listed below and stronger engine
braking will be obtained.
Transfer
"H"
112 km/h
"L"
39 km/h
3
Shift into the "L" position. The transmission will downshift
to first gear when the vehicle speed is or becomes lower
than the speed listed below and maximum engine braking
will be applied.
Transfer
Be careful when downshifting on a slippery surface.
The abrupt change in engine speed could cause the
vehicle to spin or skid.
(d) Using the "2" and "L" positions
The "2" and "L" positions are used for strong engine braking as
described previously.
With the selector lever in "2" or "L", you can start the vehicle in
motion as with the lever in "D".
With the selector lever in "2", the vehicle will start in first gear
and automatically shift to second gear.
With the selector lever in "L", the transmission is engaged in
first gear.
(69 mph)
(25 mph)
STARTING AND DRIVING
"H"
57 km/h
(35 mph)
"L"
12 km/h
(7 mph)
CAUTION
207
Advertisement
Table of Contents
