Driving Position Memory System; Setting The Driving Position; Recalling The Memorized Position - Lexus LX 470 Owner's Manual

DRIVING POSITION MEMORY
SYSTEM
A microcomputer will memorize the position of the driver's
seat, and the positions of the tilt and telescopic steering, and
outside rear view mirrors. Two different driving position
profiles can be entered into the computer's memory.
Recording the driving position in the computer's memory can
only be done when the ignition key is in the "ON" position and
the selector lever is in the "P" position.

Setting the driving position

16X162
1. Adjust the driver's seat, tilt and telescopic steering and
outside rear view mirrors to the desired position.
2. While pushing the "SET" button, push button "1" or "2"
until the signal beeps.
COMFORT ADJUSTMENT
The beep sound means that the positions are recorded in the
computer's memory.
By repeating these two steps and pressing the remaining
button, the driving position for another driver can be recorded.
To set a new memorized position, select the desired position
and perform step 2. The previous memory will be erased and
the new position will be set.
To make only slight changes to an already memorized position,
the easiest way is to first activate the memorized position, then
make the desired changes and perform step 2 above.

Recalling the memorized position

16X163
When you push button "1" or "2", the driving position will
be automatically adjusted to the position recorded for that
button.
151