Table of Contents
Advertisement
STARTING AND DRIVING
D Selecting the high mode:
Push the height select switch on the "Y" side when the vehicle
speed is under about 30 km/h (19 mph).
To change the normal mode to high, push the switch once.
To change the low mode to high, push the switch twice. It
takes about 30 seconds until the low mode changes to the high
mode.
D Selecting the normal mode:
To change the high mode to normal, push the height select
switch on the "B" side once.
To change the low mode to normal, push the height select
switch on the "Y" side once.
D Selecting the low mode:
Push the height select switch on the "B" side while the vehicle
is stopped.
To change the high mode to low, push the switch twice.
To change the normal mode to low, push the switch once.
NOTICE
Do not select the low mode on bumpy roads. If the
underbody of the vehicle touches the rugged road
surface, the vehicle may be damaged.
Even if the engine is stopped while the vehicle height is
being lowered, the operation continues for up to 12
seconds.
220
(e) Turning off the active height control
suspension
31X051b
To turn off the active height control suspension with the
vehicle stopped, push the height control switch. The
height control "OFF" indicator light comes on and the
vehicle height is fixed in the same mode as the height
control switch is pushed.
This status is memorized in the system even after the engine
is stopped.
If you push the switch again, the height control "OFF" indicator
light goes out and the active height control suspension is
turned on.
Advertisement
Table of Contents
