Table of Contents
Advertisement
AUDIO
TRAF (Traffic) function: A station that regularly
broadcasts traffic information is automatically located
and broadcasts when the program starts.
When you push the "TRAF" button, "TRAF SEEK" appears on
the display and the radio will start seeking any traffic program
station.
If no traffic program station is found, "NO TRAF INFO" appears
on the display for a few seconds and the display returns to the
previous mode. However, if the "TRAF" button is pushed while
in "TAPE" or "CD" mode, the radio will start seeking traffic
program stations again after 20 seconds.
If a traffic program station is found, the name of the traffic
program station is displayed for a while until a traffic
announcement is received. On reception of a traffic
announcement, you will hear a beep and "TRAF ANNOUNCE"
appears on the display for a few seconds.
After the traffic announcement program is over, a beep
sounds, and "TRAF ANNOUNCE" turns off, and the display
returns to the previous mode.
The volume of the traffic information program can be adjusted
independently by turning the "PWR·VOL" knob while a traffic
program station is received.
184
Radio text message:
21x111a
If the radio receives a radio text message during FM reception,
"MSG" and a text message appears on the display. After the
text message goes off, "MSG" also goes off.
After the text message goes off from the display, pushing the
"MSG" button during message reception shows the text
message again on the display.
The RDS audio system can store three messages consisting
of 64 characters in memory. To store a message in memory,
push the "MSG" button until you hear a beep.
If three messages are already stored in memory, the oldest
message will be overwritten by the new message.
Advertisement
Table of Contents
