Table of Contents
Advertisement
(b) Shifting procedure
To shift between unlock and lock modes in "H", push the
center differential lock button.
To shift between unlock and lock modes in "L", push the
center differential lock button.
To shift between "H" and "L", stop the vehicle, put the
transmission into "N" and move the four−wheel drive control
lever.
CAUTION
Never move the four−wheel drive control lever if wheels
are slipping.
Stop the slipping or spinning before
shifting.
NOTICE
For normal driving on dry and hard surface roads,
unlock the center differential. To prevent damage to the
center differential lock system, do not push the center
differential lock button when the vehicle is cornering or
when its wheels are spinning freely off the ground. If the
indicator light does not go off when unlocking the
center
differential,
drive
straight
accelerating or decelerating, or drive in reverse.
The cruise control allows you to cruise the vehicle at a
desired speed over about 40 km/h (25 mph) with your foot
off the accelerator pedal.
Your cruising speed can be maintained although a slight speed
change may occur when driving up or down a gradient, within
the limits of engine performance. On steeper hills, a greater
speed change will occur so it is better to drive without the cruise
control.
When the cruise control is on, the driving pattern of the
automatic transmission is fixed in the normal position,
regardless of the position of the driving pattern selector switch.
D To help maintain maximum control of your vehicle,
do not use the cruise control when driving in heavy
or varying traffic, or on slippery (rainy, icy or
snow−covered) or winding roads.
D Avoid vehicle speed increases when driving
downhill. If the vehicle speed is too fast in relation to
the cruise control set speed, cancel the cruise
control then downshift the transmission to use
engine braking to slow down.
ahead
while
STARTING AND DRIVING
CRUISE CONTROL
CAUTION
213
Advertisement
Table of Contents
