Driving Position Memory System - Lexus CT 200H 2014 Service Manual

INSPECTION DETAILS - C. LEFT FRONT
Lock release button
Lock release button
Lock release
button
c ) Head Restraint Adjustment
1
Up
Pull the head restraints up.
2
Down
Push the head restraint down while pressing the lock
release button.

DRIVING POSITION MEMORY SYSTEM*

a ) With the "POWER" switch in the ON mode and the "P"
park switch illuminated, check the operation:
1. Adjust the driver's seat and outside rear view mirrors
to the desired positions.
2. While pressing the "SET" button, press down the
button "1", "2" or "3" until a beep is heard.
3. Check all buttons (1, 2 and 3) to make sure that all
memorized settings operate correctly.
b ) With the vehicle in the "P" position, close the driver's
door and turn the "POWER" switch to ON mode.
1. Register a driving position to the button "1", "2" or "3".
2. Do not carry more than one key (including a card
key*) when registering. While pressing the button "1",
"2" or "3", press the driver's door lock switch (either
lock or unlock switch) until a signal beeps.
3. Unlock the driver's door using the entry function or
wireless remote control, open the driver's door, and
check that the stored driving position is recalled.
21
* If equipped
CT 200h