Important Safety Information - Russell Hobbs Classic Satin RHNPC400 Owner's Manual

I m p o rtant Safety Information
For best results, always check that the Pressure Regulator Valve,
Pressure Indicator Valve, Gasket and Lid Lock Button are in good
working order and that there are no foreign particles blocking the
Steam Vent Tube, Pressure Lift Pin, Safety Valves or Steam Vent.
To expose the Steam Vent Tube,
the Pressure Regulator Valve
must be removed.
1. Press down and turn
the Pressure Regulator Valve
counter-clockwise to the
CLEAN Position until it stops.
Lift up on the Pressure
Regulator to remove easily.
Hold the Lid up to the light.
You should be able to see light
through the Steam Vent Tube.
2. If you cannot see light, the
Steam Vent Tube is blocked.
Insert the Cleaning Brush into
the Steam Vent tube and
gently move it in and out until
you are sure the Tube is clear.
3. Replace the Pressure Regulator
Valve. Line the notches on the
bottom of the Pressure
Regulator with the grooves in
the Lid. Press down and rotate
the Regulator clockwise until it
is in position.
CAUTION: Never disassemble
Pressure Regulator or
clean the Steam Vent
Tube when Pressure
Cooker is in use.
All Pressure Release Valve Systems
are produced with the utmost
quality and standards.
Clean Pressure Regulator
Valve using the
Cleaning Brush.
16
Turn Pressure Regulator
Valve to CLEAN position
Lift Pressure Regulator
Valve for easy removal
Cleaning Brush
(P/N 21100A)