Adjustment Of The Transmitted Light Sensors - Pfaff 2438 plusline Instruction Manual

13

Adjustment of the transmitted light sensors

.10
Requirement
The difference between a material ply and a material ply with label should be recognised.
Switch on the machine.
Press the F3 key to select the menu for adjusting the transmitted light sensors.
L -
To start the adjustment for the material ply, press "+" on the corresponding +/- key.
Move the material ply to and fro under the sensors for a short time.
L -
To end the adjustment for the material ply, press "-" on the corresponding +/- key.
To start the adjustment for the material ply with label, press "+" on the corresponding +/-
L =
key.
Move the material ply with label to and fro under the sensors for a short time.
To end the adjustment for the material ply with label, press "-" on the corresponding +/-
L =
key.
Tx
If necessary, increase the transmitting power with the corresponding +/- key.
Press the TE/Speed key and sew a test seam.
Switch off the machine.
Adjustment
13 - 44