Table of Contents
Advertisement
Mounting and commissioning the machine
8
Fitting the machine cover
.01.02
8
Fitting the reel stand
.01.03
8 - 2
2
9
7
Fig. 8 - 02
Fig. 8 - 03
1
8
6
5
4
3
Slide the slots of the left and right belt
guard sections behind the heads of
screws 1 and 2.
Screw screw 3 with distance sleeve 4
into tapped hole 5.
Making sure that the bracket 6 is behind
slot 7 and in front of distance sleeve 4,
adjust the belt guard.
Tighten screws 1 and 2 (accessible
through holes 8 and 9) and screw 3.
Fit the reel stand as shown in Fig. 8 - 03.
Afterwards insert the stand in the hole in
the table top and secure it with nuts pro-
vided.
Advertisement
Table of Contents
