15
Adjusting transmitted light sensors
.09
Rule
The difference between one and more material layers should be reliably detected.
O Switch the machine on.
O Call up entry mode.
O Call up the menu to adjust the transmitted light sensors.
O Start the adjustment without material.
O End the adjustment without material.
O Start the adjustment with material (e.g. cuff).
O Move the cuff back and forth under the sensors.
O End the adjustment with material.
O Adjust the transmission power if necessary.
O End the adjustment of the transmitted light sensors.
A 100
100
0 - 100 %
20 %
0 - 100 %
Adjustment
96 - 96 %
52 %
35