Entering The Maximum Speed; Setting The Remaining Stitches For The Bobbin Thread Control - Pfaff 2438 plusline Instruction Manual

Setting up
9

Entering the maximum speed

.09
SPEED
9

Setting the remaining stitches for the bobbin thread control

.10
When the bobbin thread monitor signals that the bobbin thread has been used up, there is still
a little thread on the bobbin.
2 x
No
VAL
9 - 7
Switch on the machine.
Press the TE/Speed key to call up the input menu for the maximum speed.
The status texts "Speed" and "TE" appear on the display.
SPEED TE
No
220
Set the maximum speed by pressing the corresponding +/- key.
Switch on the machine.
Press the TE/Speed key twice to enter the parameter input function.
TE
No
760
Select the parameter "760" by pressing the corresponding +/- key.
By pressing the corresponding +/- key set the number of remaining stitches which can still
be sewn after the detection of the bobbin thread monitor (depends on the thread size).
By pressing the TE/Speed key the value is taken over and the machine changes to the
sewing mode.
The bobbin thread rest counter can only be used when parameter "660" is set at
"1" or "2".
SPEED
4500
VAL
400