Service Functions - Pfaff 2438 plusline Instruction Manual

Adjustment
13

Service functions

.14
The service functions help with finding errors and commissioning. After selecting the input
mode with the TE/Speed key, with the corresponding authorisation (access level B or C), the
menu for selecting service functions can be called up by pressing the F1 key. After the
service functions have been called up, the status text "Service" appears on the display.
The individual service functions are shown under "FKT" and can be selected with the
FKT
corresponding +/- key.
Overview of the service functions
13 - 55
Switch on the machine.
Press the TE/Speed key to call up the input mode.
Press the F1 key within 5 seconds to call up the service functions.
FKT
IN
FKT Explanation
IN Read out inputs
With the corresponding +/- key the number of the input "No" can be selected.
OUT Set/reset outputs
With the corresponding +/- key the number of the output "No" can be selected and
set accordingly "VAL" (ON/OFF).
PED Read out set value transmitter
POS Read out main drive position
SM1 Move stepping motor SM1 (edge guide)
By selecting the type "POS" and entering the desired value with the corresponding
+/- keys, the edge guide positions in the position entered. By selecting the type
"REF" and confirming the selection with the corresponding +/- keys, the edge
guide is moved to the reference position.
SERVICE
No X05 VAL
04 P04 ON