IBM IntelliStation Z Pro Type 6866 User Manual page 92

What to do next:
Go to the device-record form in Appendix C, "Computer records"
on page 147 and record the new installation.
To work with another option, go to the appropriate section.
To replace the cover and front bezel, go to "Replacing the cover
and connecting the cables" on page 82.
Installing drives in bays 4, 5, 6, 7, and 8
Before you begin
For information on installing SCSI drives, see the SCSI information
provided on the Software Selections CD that comes with your
computer.
Read "Preparing to install options" on page 55.
Turn off the computer and all other attached devices.
Disconnect all external cables and power cords, and then remove
the computer cover and front bezel (see "Removing the cover and
front bezel" on page 57).
Read the documentation that comes with the drive.
To install a drive in bays 4, 5, 6, 7, and 8:
1. Remove the plastic housing occupying the drive bay into which you
want to install the drive.
2. Remove the sliding rail mounts from the plastic housing.
76
IntelliStation Z Pro User Guide