IBM IntelliStation Z Pro Type 6866 User Manual page 126

generally used when other methods are not accessible or have not been
successful in isolating a problem suspected to be hardware related.
The Device Driver and IBM Enhanced Diagnostics CD comes with your
computer. To run the IBM Enhanced Diagnostics program from the Device
Driver and IBM Enhanced Diagnostics CD, do the following:
1. Change the start up sequence for your computer. See "Changing the
startup sequence to start from the CD" on page 109.
2. Put the Device Driver and IBM Enhanced Diagnostics CD in the CD-ROM
drive.
3. Shut down the computer.
4. Start up the computer. The IBM Enhanced Diagnostics program will
automatically run.
5. Follow the instructions on the screen.
You can also download the latest image of the diagnostics from the IBM
Web site.
To download the latest image of the IBM Enhanced Diagnostics from the
Web site and create a startable Enhanced Diagnostics diskette:
1. Go to http://www.ibm.com/pc/us/intellistation on the World Wide
Web.
2. Click Support. Select your type/model number and click
Downloadable files → Diagnostics.
3. Download the .EXE file to a hard disk directory (not to a diskette).
4. Go to a DOS prompt and change to the directory where the file was
downloaded.
5. Insert a blank high-capacity diskette in diskette drive A.
6. Type the following and press Enter:
filename a:
Where filename is the name of the file you downloaded
from the Web.
The self-extracting downloaded file is copied to the diskette, and a
startable IBM Enhanced Diagnostics diskette is created.
To start the IBM Enhanced Diagnostics program using the diagnostic
diskette, do the following:
1. Turn off your computer and any attached devices.
2. Insert the IBM Enhanced Diagnostics diskette into diskette drive A.
3. Turn on all attached devices; then turn on your computer.
110
IntelliStation Z Pro User Guide