IBM IntelliStation Z Pro Type 6866 User Manual page 156

c. Attach the slide bracket to the left rear side of the rack enclosure.
1) Align the holes on the slide bracket with the cage nuts on the
rear mounting rail.
2) From the rear of the rack enclosure, insert two long screws
through the slide bracket and mounting rail; then, tighten the
screws.
3) If it was necessary to adjust the length of the slide rails,
tighten the nuts on the slide rail, using pliers, a socket wrench,
or an adjustable wrench.
4. Attach the slide rail to the right side of the rack enclosure.
a. Extend the outer slide rail until the slide bracket is flush against
the outside of the right front mounting rail. Align the slide bracket
with the cage nuts on the mounting rail.
140
IntelliStation Z Pro User Guide