IBM IntelliStation Z Pro Type 6866 User Manual page 31

The following illustration shows the power control and status indicators for
your computer.
1
Diskette eject button
2
CD-ROM drive light
3
CD-ROM eject button
4
Diskette drive light
The following list describes the controls and status indicators for your
computer.
Power switch: Press this switch to turn your computer on or off. Do
not turn off your computer if the in-use light for the hard disk drive or
diskette drive is on.
Note: The power switch normally operates with a single touch.
However, in some circumstances the computer might not
immediately turn off. If this happens, hold the power switch
down for 5 to 10 seconds, and the computer will then turn off.
Power-on light: This status indicator lights when you turn on your
computer.
Hard disk drive light: When this light is on, it indicates that the hard
disk drive heads are being positioned or that your computer is reading
from or writing to the hard disk.
5
Power switch
6
Power-on light
7
Hard disk drive light
Chapter 2. Setting up your computer
15