IBM IntelliStation Z Pro Type 6866 User Manual page 66

Automatic power on startup sequence
These settings are used to select the sequence of devices used to startup
your computer when it is turned on automatically by a timer, a PCI device,
or by a wake up request from the LAN. The default settings for the
automatic power on startup sequence are shown here.
First startup device
Second startup device
Third startup device
To view or change the primary or automatic power on startup sequence:
1. Start the Configuration/Setup Utility program (see "Starting and using
the Configuration/Setup Utility program" on page 37).
2. Select Start Options and press Enter.
3. Select Startup Sequence from the Start Options menu and press Enter.
4. Use the arrow keys to make your selections and press Esc until you
return to the Configuration/Setup Utility program menu.
5. Select Save Settings from the Configuration/Setup Utility menu and
press Enter. Then press Esc and follow the instruction on the screen to
exit from the Configuration/Setup Utility program.
Error Startup Sequence
You can set your computer to initiate the Error Startup Sequence when
POST detects an error by enabling this feature.
To enable the Error Startup Sequence:
1. Start the Configuration/Setup Utility program (see "Starting and using
the Configuration/Setup Utility program" on page 37).
2. Select Start Options and press Enter.
3. Select Startup Sequence from the Start Options menu and press Enter.
4. Use the arrow keys to select Error Startup Sequence and set it to
Primary, Automatic, or Disabled.
5. Press Esc until you return to the Configuration/Setup Utility program
menu.
6. Select Save Settings from the Configuration/Setup Utility menu and
press Enter. Then press Esc and follow the instruction on the screen to
exit from the Configuration/Setup Utility program.
50
IntelliStation Z Pro User Guide
[Network]
[Hard disk ]
[Disabled]