Table of Contents
Advertisement
10. Install the new battery.
11. Replace the memory card, the front fan, or any adapters that were
removed to gain access to the battery.
12. Install the cover. See "Completing the installation" on page 83.
13. Plug in the power cord.
Note: When the computer is turned on for the first time after battery
replacement, an error message might be displayed. This is
normal after the battery is replaced.
14. Turn on the computer and all attached devices.
15. See Chapter 4, "Using the Configuration/Setup Utility program" on
page 37 to set the date and time and any passwords.
16. Dispose of the old battery as required by local ordinances or
regulations.
Chapter 6. Troubleshooting
119
Advertisement
Table of Contents
Troubleshooting
