IBM IntelliStation Z Pro Type 6866 User Manual page 90

Installing a drive in bay 1
Before you begin
For information on installing SCSI drives, see the SCSI information
provided on the Software Selections CD that comes with your
computer.
Read "Preparing to install options" on page 55.
Turn off the computer and all other attached devices.
Disconnect all external cables and power cords, and then remove
the computer cover and front bezel(see "Removing the cover and
front bezel" on page 57).
Read the documentation that comes with the drive.
Note: To install a 3.5-inch drive into drive bay 1, you need an industry
standard bay adapter bracket.
To install a drive in bay 1:
1. Touch the static-protective package containing the new drive to any
unpainted metal surface and then remove the drive.
2. Remove the EMC shield covering bay 1 and insert the drive into the
unoccupied drive bay. Then insert and tighten the screws to hold it in
place.
74
IntelliStation Z Pro User Guide