Battery - HP Spectre x2 Maintenance And Service Manual

3. Remove the bottom bezel (3).
4. Remove the bottom bezel.
Reverse this procedure to install the bottom bezel.

Battery

Description
4-cell, 41-WHr, 2.7-AHr, Li-ion battery (includes cable)
Before removing the battery, follow these steps:
1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the tablet.
3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4. Remove the display panel assembly (see
5. Remove the bottom bezel (see
Remove the battery:
1. Disconnect the battery cable (1) from the system board.
2. Remove the six Phillips PM2.0×2.8 screws (2) that secure the battery to the back cover.
Display panel assembly on page
Bottom bezel on page 24).
Spare part number
902500-855
20).
Component replacement procedures 25