Left Speaker - HP Spectre x2 Maintenance And Service Manual

12 detachable pc (model numbers 12-c000 through 12-c099)
Hide thumbs Also See for Spectre x2:
Table of Contents

Advertisement

Remove the wireless antenna:
1.
Remove the four Phillips PM2.0×3.8 screws (1) that secure the wireless antenna transceivers to
the back cover.
2.
Detach the wireless antenna transceivers (2) from the back cover. (The wireless antenna transceivers are
attached to the back cover with double-sided adhesive.)
3.
Release the wireless antenna cable from the retention clip (3) built into the back cover.
4.
Remove the wireless antenna cables (4) and transceivers.
Reverse this procedure to install the wireless antenna.

Left speaker

Description
Left speaker (includes cable)
Before removing the left speaker, follow these steps:
1.
Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the tablet.
3.
Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4.
Remove the display panel assembly (see
the following components:
a.
Bottom bezel (see
b.
Battery (see
Display panel assembly on page
Bottom bezel on page
Battery on page
25)
24)
Component replacement procedures
Spare part number
924846-001
20), and then remove
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents