Table of Contents
Advertisement
2.
Detach the microSD memory card reader board (2) from the back cover. (The microSD memory card
reader board is attached to the back cover with double-sided adhesive.)
3.
Remove the microSD memory card reader board.
Reverse this procedure to install the microSD memory card reader board.
Wireless antenna
Description
Wireless antenna (includes left and right wireless antenna cables, transceivers, and double-sided
adhesive)
Before removing the wireless antenna, follow these steps:
1.
Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the tablet.
3.
Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4.
Remove the display panel assembly (see
the following components:
a.
Bottom bezel (see
b.
Battery (see
c.
Fan (see
d.
Microphones (see
e.
Webcams (see
f.
Heat sink (see
g.
System board (see
50
Chapter 5 Removal and replacement procedures
Bottom bezel on page
Battery on page
25)
Fan on page
31)
Microphones on page
Webcams on page
Heat sink on page
44)
System board on page
Display panel assembly on page
24)
38)
40)
46)
Spare part number
924213-001
20), and then remove
Hide quick links:
Advertisement
Table of Contents
