Microphones - HP Spectre x2 Maintenance And Service Manual

Remove the power button board:
1. Detach the power button board cable (1) from the right speaker. (The power button board cable is
attached to the right speaker with double-sided adhesive.)
2. Detach the power button board (2) from the back cover. (The power button board is attached to
the back cover with double-sided adhesive.)
3. Remove the power button board and cable.
Reverse this procedure to install the power button board.

Microphones

Description
Left microphone (includes cable and rubber isolators)
Right microphone (includes cable and rubber isolators)
Before removing the microphones, follow these steps:
1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the tablet.
3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4. Remove the display panel assembly (see
5. Remove the bottom bezel (see
6. Remove the battery (see
38 Chapter 5 Removal and replacement procedures
Display panel assembly on page
Bottom bezel on page
Battery on page 25).
20).
24).
Spare part number
924840-001
924839-001