Table of Contents
Advertisement
Infrared LED board
Description
Infrared LED board (does not include infrared board cable)
NOTE:
The infrared LED board spare part kit does not include the infrared LED board cable. The
infrared LED board cable is available using spare part number 924168-001.
Before removing the infrared LED board, follow these steps:
1.
Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the tablet.
3.
Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4.
Remove the display panel assembly (see
the following components:
a.
Bottom bezel (see
b.
Battery (see
c.
Fan (see
d.
Microphones (see
e.
Webcams (see
f.
Heat sink (see
g.
System board (see
h.
Wireless antenna (see
Remove the infrared LED board:
▲
Remove the infrared LED board
Bottom bezel on page
Battery on page
25)
Fan on page
31)
Microphones on page
Webcams on page
Heat sink on page
44)
System board on page
Wireless antenna on page
Display panel assembly on page
24)
38)
40)
46)
50)
Spare part number
924837-001
20), and then remove
Component replacement procedures
57
Hide quick links:
Advertisement
Table of Contents
