Kickstand
Description
Kickstand
Before removing the kickstand, follow these steps:
1.
Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the tablet.
3.
Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4.
Remove the display panel assembly (see
5.
Remove the bottom bezel (see
6.
Remove the battery (see
Remove the kickstand:
1.
Remove the three Phillips PM2.0×3.8 screws (1) that secure the left bezel to the back cover.
2.
Remove the left bezel (2).
The left bezel is available using spare part number 924165-001.
3.
Remove the PM2.0×2.8 screw (1) that secures the right bezel to the back cover.
4.
Remove the two Phillips PM2.0×3.8 screws (2) that secure the right bezel to the back cover.
32
Chapter 5 Removal and replacement procedures
Display panel assembly on page
Bottom bezel on page
Battery on page
25).
20).
24).
Spare part number
922577-001