Importing The Clip For Stinger Transition Effect From The Pc - Datavideo SE-650 Instruction Manual

5.4.2 Importing the Clip for Stinger Transition Effect from the PC

On the SE-650, you will be able to add a clip between sources. Besides using the existing clips on the
machine, you are also allowed to import your own clip (a series of bmp/png/jpg/pic files) to the SE-
650 from the PC using the Switcher Image Import/Export utility, which can be downloaded from the
SE-650 product page.
• First connect the SE-650 to a Windows computer using an RJ-45 Ethernet cable.
• Since the SE-650 has a default IP address of 192.168.1.101 so the computer should be given
the IP settings that match the same IP range as the switcher.
• Turn on the Windows computer and manually set the IP to 192.168.1.X within the Windows
Network and Sharing Centre.
• Now install the Switcher Image Import/Export utility on the computer.
• After the utility is installed, click and open the user interface as shown below.
Click Setup on the MENU SELECT pane
and if the connection between the SE-
650 and the PC has been successfully
established, you will be able to see the
network information of your switcher.
Select Import-Export from the yellow
menu options.
62