Transition Effects - Datavideo SE-500MU Instruction Manual

User Memory
User Memory buttons 1-3 allow the user to quickly
recall and load previously saved switcher settings with
a single button click. This includes PIP and Keyer
settings. See the User Memory section for more
information.
Shift Button
Clicking the Shift button will switch USER 1-3 buttons
to act as USER 4-6 buttons

Transition Effects

WIPE Transition Effect Selection
Each Wipe button consists of black and white colors.
The white represents the current Program image and
the black represents the WIPE-IN image. There are a
total of 2 WIPE presets available on the SE-500MU PC
APP panel; the WIPE buttons allow the user to make a
selection directly from the control panel for the first
two which are Left Right and Top Bottom wipes.
Center WIPE can be selected from the MENU (Start).
Clicking the REV button reverses the direction of the
WIPE.
MIX Enable/Disable button
A MIX, also known as a dissolve, is a transition wherein
the Program video is replaced by the Preview video at
a smooth rate, and at the same time. Clicking the MIX
button will enable the MIX transition effect and
automatically disable the WIPE button. To activate the
MIX effect, simply click the AUTO button or move the
T-Bar.
WIPE Transition Effect Enable/Disable button
Clicking the WIPE button enables the WIPE transition
effect. After that, the WIPE transition effect can be
selected. To trigger the WIPE transition effect, simply
click the AUTO button or move the T-Bar.
Wipe transition effect selection, border and position
can be configured in the MENU (Start).
16