Transition Effects - Datavideo SE-500HD Instruction Manual

9 Luma Keyer Enable/Disable buttons
10 Split selection button
19 Headphone volume control knob
Switcher Settings
Menu browsing buttons
Press the MENU button to gain access to the menu;
use the up/down/left/right arrow buttons to browse
through the menu and press ENTER button to select an
option or MENU button again to exit.
Reset Button
Mode 1 - When in Menu Select mode (left hand
column of the OSD menu), pressing the 'Reset' button
will reset all current menu items to their factory
defaults.
Mode 2 - When in a Sub-Menu, pressing the 'Reset'
button will reset the current menu line only.
User Memory
User Memory buttons 1-3 allow the user to quickly
recall and load previously saved switcher settings with
a single button press. This includes PIP and Keyer
settings. See the
information.
Shift Button
Pressing the Shift button will switch USER 1-3 buttons
to act as USER 4-6 buttons

Transition Effects

WIPE Transition Effect Selection
Each Wipe button consists of black and white colors.
The white represents the current Program image and
the black represents the WIPE-IN image. There are a
total of 3 WIPE presets offered on the SE-500HD; the
WIPE buttons allow the user to make a selection
directly from the control panel for the first 2 which are
horizontal and vertical wipes. Center WIPE can be
selected from the menu (Start).
Pressing the REV button reverses the direction of the
WIPE.
10
User Memory section for more