Transition Effects - Datavideo SE-650 Instruction Manual

Switcher Keyboard Descriptions
Menu browsing buttons
Press the MENU button to gain access to the menu;
use the up/down/left/right arrow buttons to browse
through the menu and press ENTER button to select an
option or MENU button again to exit.
Reset Button
Mode 1 - When in Menu Select mode (left hand
column of the OSD menu), pressing the 'Reset' button
will reset all current menu items to their factory
defaults.
Mode 2 - When in a Sub-Menu, pressing the 'Reset'
button will reset the current menu line only.
User Memory
User Memory buttons 1-3 allow the user to quickly
recall and load previously saved switcher settings with
a single button press. This includes PIP, Keyer and DSK
settings. The switcher loads settings saved to User
Memory 0 as default settings used at boot up. See the
User Memory section for more information.

Transition Effects

WIPE Transition Effect Selection
Each Wipe button consists of black and white colors.
The white represents the current Program image and
the black represents the WIPE-IN image. There are a
total of 2 WIPE presets offered on the SE-650; the
WIPE buttons allow the user to make a selection
directly from the control panel for the first 2 and
remaining 30 WIPE effects are selectable from the
menu (Start).
Pressing the REV button reverses the direction of the
WIPE.
13