User Mems; Load Memory; Save Memory; Setup - Datavideo SE-500HD Instruction Manual

Audio Mixer: If Audio Mixer mode is selected, tally light of the PGM source camera selected on the
keyboard panel will be turned ON (Red). While transition is in progress, the tally light color will remain
unchanged. The tally light color will only change (red/green) after the transition of PGM and PVW
views is complete.

3.6 User Mems

In "User Mems", the user is allowed to load previously saved settings and save the currently
configured settings.
Option Parameters
User Mems

Load Memory

Load

Save Memory

Save
3.6.1 Load Memory
Use the up/down arrow to select the desired memory location and load the saved setting by selecting
"Load".
Tip: The user can also press one of the USER memory shortcut buttons (1-3) on the control panel as a
quick way of loading those previously saved User configurations. Use the SHIFT button to switch
between USER MEMORY 1-3 and USER MEMORY 4-6.
3.6.2 Save Memory
Use the up/down arrow to select the desired memory location and save the current setting by
selecting "Save".

3.7 Setup

In the "Setup" menu, the user can change the output resolution, reset the SE-500HD to its Factory
Default values, choose the preferred OSD menu language, upgrade firmware and view the current
firmware versions (Mainboard and Keyboard).
Option Parameters
PGM Out Res.
Setup
MV Out Res.
Parameter Value or Range
User 1-6
User 1-6
Parameter Value or Range
1080p/60
1080p/59.94
1080p/50
1080i/60
1080i/59.94
1080i/50
720p/60
720p/59.94
720p/50
576i
480i
1080p/60
1080p/59.94
1080p/50
20
Default Value
Default Value